There are a thousand kinds of molds. Most of them are harmful because they can cause allergic reactions. For examples sneezing, respiratory issues and headaches. Molds will also leave a very unattractive and unpleasing look on your walls, furniture and other fabric in your house. In the long run, molds can even cause serious damages to your house. Then it costs a huge amount of money to fix it.
The main culprit for the appearance of mold is the excessive humidity. So, how to get rid of mold smell? You need to get rid of mold and hence fixing the over humidity problem.
The areas where you are likely to get molds and mold smell are:
- Kitchen (the area near the sink)
- Bathroom (near the shower)
- Basement (bad ventilation and possible leakage)
Let’s read on to see what you can do on how to get rid of mold smell.
Before you start, remember to wear your personal protective gear including goggles, mask and gloves. This can protect you against dirt and air-borne elements as well as the strong smell of harsh chemicals you are going to use.
When you clean room, open all of the doors and windows to enhance circulation and let fresh air come inside your house. In addition, you should turn on all of the ventilation fans, ceiling fans and air purifiers.
The common mixture I recommend that you should use is water with vinegar. White vinegar is relatively cheap and easy to find. Furthermore, it is safer on your skin in comparison with another method.
Moreover, you can use borax, baking soda and hydrogen peroxide. Bleach and ammonia are effective but stronger so they can even cause more harm to the furniture and fragile materials.
How to Get Rid of Mold Smell in the Kitchen
First, check for possible leaky plumbing under the sink and other pipers around the kitchen. Fix them immediately in case there is a leakage.
You should check the bins and refrigerator as well as throw away old foods which you don’t need anymore. After that, clean them with warm water and vinegar. Give your refrigerator a deep cleaning by taking out all off the dip trays and wipe off the excessive condenses underneath.
Also, clean your microwave with warm water and vinegar. Alternatively, you can put a bowl of water with some slices of lemons and heat the microwave on for 10 to 15 minutes. Applying the same method to your oven can help you to get rid of the mold smell as well.
Soak all of your wooden cooking tools and cutting board into vinegar to get rid of molds. Hang them out and let them dry totally before putting them back into the tray.
Clean the surface of the kitchen with warm water and vinegar, and then dry it immediately. You can apply mold-resistant paint to prevent molds from happening in the next few months.
Lastly, you can place some open can of baking soda or fresh coffee ground inside the kitchen cabinets and draws. This can help you soak in all of the uncomfortable odors.
How to Get Rid of Mold Smell in the Bathroom
You should look for molds and mold spores on the wall to scrub them off with a brush.
For stronger effectiveness in the bathroom, you can pour undiluted white vinegar directly into the spray bottle and spray generously onto all of the wall titles of the bathroom. After that, let it sit for at least 1 hour.
Next, you can clean off with hot water and a damp cloth. Finally, wipe this area completely with a dry cloth.
In addition, next time, when you take a shower, remember to leave the door open for at least 15 minutes so that all of the water vapors will have a chance to escape. And don’t simply leave your towel on the ground. Instead, hang it on the towel rack for it to dry properly.
How to Get Rid of Mold Smell on the Living Room and Bedroom
Firstly, you should vacuum all of the surfaces with a vacuum cleaner packed with a High-efficiency particulate air filter. Thus, you can suck in the smallest mold spores in the air.
Furthermore, adding baking soda to your carpets and rubbing them thoroughly before you vacuum. Actually, this can help you to clean the carpets deeper and get rid of mold and other small particles under them better. In addition, mop the floor and let it dry properly.
If you use air filter and air conditioner in these rooms, take the filter of these appliances out and wash them in the washer.
In case you spot molds on the ceiling, check if there is any leak in the roof. If the answer is yes, then call in a professional builder to fix the roof for you.
You should wash all of the fabrics in your living room and your bedroom including window curtains, bed sheets and liners. If you smell mold from these fabrics, you had better wash them with warm water and vinegar. Let them air- dry completely under the sun.
Clean the Basement
It is necessary to investigate carefully and take out all of the damp items in the basements such as old papers and books, as well as cardboard boxes and living plants.
You might want to take all of the other items in the basement out and let them air- dry under the board sunlight.
Clean of all the windows and doors with warm water and vinegar. You can also apply mold resistant paint or coconut oil to prevent molds from building up in these areas.
Furthermore, you should consider installing a dehumidifier in your basement as this room often has the highest level of moisture and the worst air ventilation.
If you have taken all of the measures and think that the mold smell is still there, then contact a professional mold removal and cleanup team. They will help you to investigate further underlying problems and use stronger special detergents to clean up your house.
Besides cleaning, there are a lot of things you can do to make sure mold and mold smell will reoccur in the future. Consider things such as cleaning your house, opening all doors and windows frequently, checking for leakages. However, don’t forget to use a dehumidifier or air conditioner to maintain a relatively ideal level of humidity in your house.
With all the tips above and proper actions, you will know how to get rid of mold smell and prevent molds from happening in the future, keeping a clean and healthy environment for everybody.