Prevent mold is a must! The sign of the dirty little bits of mold is one of the most unpleasant signs in your house. It damages the furniture, the walls and the ceilings. It also leads to an unwelcoming moldy smell.
In the worst case, mold would lead to serious impacts on our health and brain. Especially people who are suffering from asthma and allergies will find it tough to breathe. It is because mold spores could be also inhaled into their body.
In order to get rid of mold, you need to spend a lot of money for repairing and replacing the damaged parts of your house.
Therefore, you need to prevent the unwanted problems that mold might cause and save money on fixing the damages. The best thing that we can do is to prevent mold from growing and developing.
Here are 10 best measures that you could take in order to prevent mold in your house:
- Enhance Air Ventilation In Your House
- Maintain An Ideal Level Of Humidity
- Clean Your HVAC System Regularly
- Fix Any Water Leak Immediately
- Dry Wet Clothes Outside
- Block Any Condensation
- Prevent Mold by Removing Unnecessary Clutter
- Cleaning And Drying Surfaces
- Water Your Plants With Taheboo Tea
- Have Your House Checked By An Expert
Enhance Air Ventilation In Your House
You might be unaware but daily activities in your house such as cleaning, cooking and smoking can release a huge amount of chemicals and toxins into the air. These pollutants then promote the growth and development of mold in your house.
When there is good air ventilation inside your house, it also means that the level of humidity is also at a lower level. High level of humidity is another factor that could support the growth and development of mold.
Therefore, you need to make sure you have good air ventilation in your house.
First of all, avoid smoking as much as you can inside your house. You can have a designated area for smoking outside instead. Secondly, you should open the doors and windows frequently. By this way, you can get rid of the indoor air pollutants and create a chance for the fresh air to come in.
Finally, if the weather does not permit you to open your doors, you can use an AC unit or an air filter to clean the indoor air inside your house.
Maintain An Ideal Level Of Humidity
The ideal level for mold to start growing and developing is around 60% and more. The higher the level of humidity is, the quicker the rate of mold’s development.
There are some seasons (for example in the summer) and some areas (such as bathroom and basement) when and where the level of humidity is very high. In these areas, you should consider running box fans frequently or open the windows and doors when it is sunny.
But the best option you could have is installing a dehumidifier inside these rooms. A suitable dehumidifier will be able to suck in the excess moisture in the air and return the drier air back into these rooms. You can set a level of humidifier so that you would be able to maintain a level of humidity under 60% with ease all day long.
Clean Your HVAC System Regularly
As I mention above, it is a good idea to have air filter and dehumidifier inside your house to have you maintain good air ventilation and level of humidity. However, many people might neglect to clean the filers- the important parts of these electrical appliances on a regular basis- and that would mean that these appliances, instead of cleaning your air and preventing mold; they will do the exact opposite.
The filters in these air filter and dehumidifier are responsible to keeping dirt and other air borne pollutants as well as excessive moisture. If you do not clean them over time, they will become very moist with a lot of dirt, bacteria and fungi, enhance mold’s development.
What makes the situation worse is that when they release the air back to the rooms, they will also spread mold into the air and to other parts of your house.
That is the reason why you should clean the HVAC system as well as the air filters on a regular basis. Remember to dry them thoroughly after cleaning.
In case you use disposable filter, you should replace with the new one in a given time according to the instructions of the manufacturers.
Fix Any Water Leak Immediately
One of the main reasons why mold develops in your house is the moisture that leaked water can create. The areas which are more vulnerable and tend to have more cases of water leak include the roofs, ceilings and water pipes.
When there are water leaks in these areas, they will become very moist- which means an ideal environment for mold to develop.
Therefore, you should pay attention to these areas in your house. Do regular check for any possible water leak and fix it as soon as possible.
Dry Wet Clothes Outside
First of all, don’t hang your clothes to air dry them inside your house. These clothes are obviously wet, which creates an ideal living condition for mold. In addition, they will add extra moisture into the air, raising the level of humidity.
It is the best idea to dry your clothes outside in a sunny and windy place. In case it is raining or cold outside, you can dry your clothes in a dryer.
It is also worth mentioning that you should not let piles of unwashed clothes in any places inside your house for a long time. Mold and mildew will develop on these clothes and you will have a hard time to get rid of mold as well as its smell out of them.
Block Any Condensation
Condensation happens mostly in the winter. When some things like windows and doors become colder since they are in contact with the outside temperature, the water molecules in the air will cool down and become liquid before landing on these surfaces. And when there is water on any surface, it means extra moisture and then the growth of mold.
Since the reason that condensation happens stems from cold windows, doors and walls; it is compulsory to keep your house warm to prevent it from happening. Turn on the heater is one effective way. In addition, you can consider adding extra insulation to these surfaces to provide extra warmth for them.
Prevent Mold by Removing Unnecessary Clutter
You should keep your house clean of clutter such as piles of clothes and newspapers. Pay attention to the basement! It is where you tent to leave unwanted stuff piling over other for a long time without using them.
When you leave various piles of clutter around your house, they will prevent air from moving around your house, causing bad air ventilation.
Another reason you should get rid of old piles of newspapers is that they are the main food source for mold. Yet, you will never get rid of mold developing on these papers no matter what method you use.
Cleaning And Drying Surfaces
Some surfaces such as the walls in your bathroom and kitchen are quite moist most of the time. It creates an ideal environment for the development of mold. Remember to clean these areas all the time. Pay attention to the very tiny mold spores and get rid of them before they turn into bigger mold. Make sure you dry these surfaces with another clean cloth afterwards.
You can clean these areas simply by using a mixture of white vinegar and warm water. White vinegar is very effective in term of fighting against bacteria and germs.
Keep in mind that in a wet area, the time it takes for mold to develop is about 1 or 2 days. Therefore, you should dry any wet area in your house as soon as possible.
Water Your Plants With Taheboo Tea
Having some indoor plants inside your house is a very good way to enhance and purify the indoor air’s quality. It is because these plants can absorb indoor pollutants and volatile organic compounds before releasing fresh air and oxide back into your house.
However, these plants, especially the soil areas are a very ideal environment for mold to grow and reproduce. Leaves are also great places that mold likes living in.
You can get rid of your indoor plants to prevent the growth of mold there completely. However, it would be waste if you cannot use these plants for decoration as well as natural air purifier.
Luckily, there is a simple solution to this problem. All you need to do is watering your plants with a mixture of water and Taheboo tea. Taheboo tea will help to hinder the growth of mold on these areas very effectively.
Have Your House Checked By An Expert
Once a year, you should schedule to have your house checked by a mold removal expert. The expert would be able to identify the potential sources for mold to live in your house. Also, he will use preventative methods to mold proof it.
In addition, he should check the heating and cooling system in your house. Makes sure it is doing a good job in air ventilating and keeping low level of humidity.
The plumbing system of your house needs to be checked by an expert as well.
Here are some of the most useful ways you can do to prevent mold. If mold develops in your house, it might lead to damage in your house’s furniture. Also, there might be some negative impacts on everybody‘s health, including lung inflammation, brain damage and cancer. It also costs you a huge amount of money to control and get rid of mold in your house.
Therefore, you should keep these tips in mind. Make them as your daily activities in order to keep your house clean, dry and mold proof.